AUDIO RECORDER SPECIFIC:

RFI WARNING:
The Zoom H1 (v1) has noticeable RFI (Radio Frequency Interference) when used at less than 5 FEET from an iPhone 13 Pro max. This is a major limitation, especially for LAV use, because if the recorder is in the pocket of a groom, and they have an iPhone somewhere in their coat, this is going to cause RFI.

This specific model of the microphone does NOT fully plug in (and you only get 1 channel of audio. I think it's the LEFT ear). I don't know if there is a non-locking version of this model, but there is of the more popular (and smaller) 044. I don't really like monitoring audio when it's just coming in through one ear, so I don't use this mic with this audio recorder. I did complete this test for reference (and in case I had to use it for some reason) and the REC. LEVEL I felt gave me the best results was at 55. This requires boosting the levels in post-production, but I tried going up to 63 (which is what I consider the highest level this recorder does well at before it introduces self-noise) and the audio didn't work as well with noise reduction (which some recordings with this mic may need, because it doesn't isolate too well). It's good to start with a slightly lower REC. LEVEL on a non-32-bit float recorder anyway, to give yourself more "head room".

MIC-SPECIFIC:
This is yet another test in which a mic sounds better with the Comica CVM-MF1 (Lavalier Furry). Also, this is one of the few mics that works (fairly well) WITHOUT a windscreen at all (I suspect it may have some built-in wind protection, because the top of the mic is bigger than any lavalier mic I've seen. To me, the fact that this sounds better with the FURRY is kind of a timesaver, because now I can leave the furry on for either INDOOR or OUTDOOR use (except for the fact that you need to wear it with dark clothing to hide it).