96k 24bit
REC. SETTINGS
OFF
REC. LOWCUT
OFF
REC. LIMITER
"HI"
AUX. SETTINGS
N/A
AUX. BASS
N/A
AUX. HIGH-LOW
N/A
MIC. SETTINGS
N/A
MIC. LOWCUT
N/A
MIC. HIGH PASS
N/A
(RFI) RADIO FREQUENCY INTERFERENCE
LESS THAN
1.1ft / 0.34m
BETWEEN
1.1ft / 0.34m -2.2ft / 0.67m
BETWEEN
2.2ft / 0.67m -3.3ft / 1m
BETWEEN
3.3ft / 1m -4.4ft / 1.34m
Published:
January 7, 2023 at 5:21:03 PM
REAL RATINGS
After testing each microphone, I like to know if it sounds realistic (accurate lows/bass, mids, highs/treble) in combination with the recorder and/or AUX. amplifier, to see if it needs EQ.
LOWS/BASS
B
DO THE "LOWS" SOUND REAL?
MIDS
C
DO THE "MIDS" SOUND REAL?
HIGHS/TREBLE
A
DO THE "HIGHS" SOUND REAL?
NOTES:
AUDIO RECORDER SPECIFIC:
I'm testing this microphone on as many audio recorders as I can, and one difference I noticed about this mic (and most mics) on the Zoom F1 is that when the REC. LEVEL is set to a normal level (one that doesn't need to be amplified in post-production) it seems to have more BASS than the Zoom H1, H1n and F2.
MIC-SPECIFIC:
This is yet another test in which a mic sounds better with the Comica CVM-MF1 (Lavalier Furry). Also, this is one of the few mics that works (fairly well) WITHOUT a windscreen at all (I suspect it may have some built-in wind protection, because the top of the mic is bigger than any lavalier mic I've seen. To me, the fact that this sounds better with the FURRY is kind of a timesaver, because now I can leave the furry on for either INDOOR or OUTDOOR use (except for the fact that you need to wear it with dark clothing to hide it).
Remember to always monitor your audio while you're recording (using accurate headphones) because good settings can't fix bad audio. Also, these settings will not establish the exact level you'll need for every scene, but the goal is to provide a good starting point that will become clean, after adjusting in post. Additionally, these "custom settings" are used to make the Microphone-Specific EQ files work (as they won't work as intended if any of they aren't used). The EQ files were created to correct any imperfections of the microphone and/or wind protection (FOAM and/or FURRY) and were made in Audacity (the free audio editor) to make them as affordable & universal as possible.
