ABOUT:
At this "VLOG" proximity, it's going to need a custom EQ, because it really needs the 150 Hz MIC. LOWCUT (to remove handling and background noise) but it strips way too much BASS out, so that will need to be added back with the custom EQ. I think these settings create a much better starting point than leaving the LOWCUT off, but it really doesn't sound good (without the EQ).

UPDATE:
Nice! I have super good news...I figured out how to remove the RFI from this combo. All you have to do is TURN OFF the wireless RECEIVER! That's right, if it's off there's no problem with RFI, but if it's ON, there is constant static from RFI, especially when it's closer than 3 feet. I'm going to test this some more, but for now this is a quick and easy fix, if you don't need to use the wireless receiver, that is. There is a TINY amount of RFI noise when I turn the MIC. BOOST all of the way down (to "0") on the dial, but when you have it at a normal level, this noise is not noticeable.

PREVIOUS NOTE:
I'm just starting this test, and I'm not sure if the RFI (Radio Frequency Interference) will render this microphone/audio recorder combination useless or not. The reason I don't know yet, is that I have identified that if the wireless RECEIVER is too close to the cable that attaches the microphone to the TRANSMITTER/Recorder, there is a ton of RFI. However, when I move the RECEIVER further away, it lessens considerably...and when I turn it OFF, the RFI MIGHT BE LOW ENOUGH to not cause a problem...so I'm still testing...

As noted before, the shock mount that is included with this mic doesn't do a very good job of protecting it from the sound of bumps and/or wiggles, so you'll have to hold it steady in that case. (If I can find an affordable, aftermarket shock mount, I will update this review).